Size guide

Measurements, not adjectives.

Every number below is taken flat on the garment, not on a body. Compare them against a tee you already like and you will get the fit right first time.

How to measure

Lay a tee you own flat on a table, smooth out the wrinkles, and take three numbers with a tape measure.

1

Chest

Measure straight across the shirt from one armpit seam to the other. That is the flat chest — half the full circumference.

2

Length

From the highest point of the shoulder, beside the collar, straight down to the bottom hem.

3

Sleeve

From the shoulder seam out along the top of the sleeve to the cuff edge.

4

Compare

Match those three numbers to the chart below. Within 1 cm either way will feel the same on.

The chart

Measurements are flat, taken on the garment, with a tolerance of about 1 cm. All our tees use the same classic unisex block, so one chart covers the whole shop.

Flat measurements in centimetres
SizeChest (flat)LengthSleeve
Flat measurements in inches
SizeChest (flat)LengthSleeve

Choosing a fit

The block is a classic unisex cut. It is straight through the body with a set-in sleeve — not boxy, not slim.

  • Regular fit. Order your usual size. The shirt skims rather than clings.
  • Relaxed fit. Size up one. You get roughly 5 cm more across the chest and 2.5 cm more length.
  • Between two sizes. Size up. Cotton has very little give across the chest, and the extra length is easier to live with than a short hem.

The garment-dyed tee

The house wordmark tee uses a garment-dyed body. It is dyed after it is sewn, which gives it a slightly uneven colour and a softer hand straight out of the bag. It relaxes a little after the first wash rather than shrinking, so size it exactly as you would the printed tees.

Still unsure? Email the chest and length of a tee you already like to [email protected] and we will tell you which size to order. If it still comes out wrong, US size swaps are free once per order within thirty days.

Keeping the fit

  • Wash cold on a gentle cycle, turned inside out.
  • Tumble dry low or hang to dry — a hot dryer is what shrinks cotton, not the wash.
  • Keep a hot iron off the print. Press around it, or iron inside out on low.
  • Skip fabric softener on the print area; it coats the fibres and dulls the ink.